[CCNAv6 S2] 1.3.2.5 Packet Tracer - Investigating Directly Connected Routes



Packet Tracer - Investigating Directly Connected Routes
Objectives

Part 1: Investigate IPv4 Directly Connected Routes

Part 2: Investigate IPv6 Directly Connected Routes

Background

The network in the activity is already configured. You will log in to the routers and use show commands to discover and answer the questions below about the directly connected routes.
Note: The user EXEC password is cisco and the privileged exec password is class.
Part 1:     Investigate IPv4 Directly Connected Routes
Step 1:     Use show commands to gather information about the IPv4 directly connected networks.

Enter the following command on R1:

R1> show ip route ?
a.     What option would be most beneficial in determining the networks assigned to the interfaces of the router?

b.    Which networks are directly connected on R1? Hint: Use the option determined above.

c.     Which IP addresses are assigned to the LAN interfaces on R1?

d.    Which networks are directly connected on R2?

e.     Which IP addresses are assigned to the LAN interfaces on R2?

Step 2:     Verify PC addressing and test connectivity.

a.     Open a command prompt on PC1. Issue the command to display the IP settings. Based on the output, would you expect PC1 to be able to communicate with all interfaces on the router? Provide a short answer describing your expectations. Open a command prompt on PC2. Issue the command to display the IP settings. Based on the output, would you expect PC2 to be able to communicate with PC1? Verify your expectations.

b.    Determine the IP addresses of PC3 and PC4. Record the results and determine if PC3 and PC4 are able to communicate. Test connectivity from PC1 to PC3. Was the test successful?

c.     Bonus: Looking at the outputs of the routing tables on R1 and R2, what might indicate a reason for the success or failure of communication between PC1 and PC3?

Part 2:     Investigate IPv6 Directly Connected Routes
Step 1:     Use show commands to gather information about the IPv6 directly connected networks.

a.     Which IPv6 networks are available on R1?

b.    Which IPv6 unicast addresses are assigned to the LAN interfaces on R1?

c.     Which IPv6 networks are available on R2?

d.    Which IPv6 addresses are assigned to the LAN interfaces on R2?

Step 2:     Verify PC settings and connectivity.

a.     Open a command prompt on PC1. Issue the command to display the IPv6 settings. Based on the output, would you expect PC1 to be able to communicate with all interfaces on the router? Provide a short answer describing your expectations

b.    Open a command prompt on PC2. Issue the command to display the IPv6 settings. Based on the output, would you expect PC2 to be able to communicate with PC1? Verify your expectations.

c.     Determine the IPv6 addresses of PC3 and PC4. Record the results and determine if PC3 and PC4 are able to communicate. Test connectivity from PC1 to PC3. Was the test successful?

d.    Bonus: What might indicate a reason for the success or failure of communication between PC1 and PC3 after looking at the outputs of the IPv6 routing tables on R1 and R2?



Link Download:  Here



Nhận xét

Đăng nhận xét

Bài đăng phổ biến từ blog này

[CCNAv6 S2] 2.2.2.4 Packet Tracer - Configuring IPv4 Static and Default Routes

Hình ảnh
Packet Tracer - Configuring IPv4 Static and Default Routes Addressing Table Objectives Part 1: Examine the Network and Evaluate the Need for Static Routing Part 2: Configure Static and Default Routes Part 3: Verify Connectivity Background In this activity, you will configure static and default routes. A static route is a route that is entered manually by the network administrator to create a reliable and safe route. There are four different static routes that are used in this activity: a recursive static route, a directly attached static route, a fully specified static route, and a default route. Part 1:     Examine the Network and Evaluate the Need for Static Routing a.     Looking at the topology diagram, how many networks are there in total? b.    How many networks are directly connected to R1, R2, and R3? c.     How many static routes are required by each router to reach networks that are not directly ...
Đọc thêm

[CCNAv6 S2] 8.3.1.2 Packet Tracer - Skills Integration Challenge

Hình ảnh
Packet Tracer – Skills Integration Challenge Addressing Table VLAN Port Assignments and DHCP Information Scenario In this culminating activity, you will configure VLANs, trunks, DHCP Server, DHCP relay agents, and configure a router as a DHCP client. Requirements Using the information in the tables above, implement the following requirements: ·         Create VLANs on S2 and assign VLANs to appropriate ports. Names are case-sensitive ·         Configure S2 ports for trunking. ·         Configure all non-trunk ports on S2 as access ports. ·         Configure R1 to route between VLANs. Subinterface names should match the VLAN number. ·         Configure R1 to act as a DHCP server for the VLANs attached to S2. -       Create a DHCP pool for each VLAN. Names are case-sensitive. -       Assign the ap...
Đọc thêm

[CCNAv6 S3] 7.2.3.5 Packet Tracer - Troubleshooting EIGRP for IPv4

Hình ảnh
Packet Tracer – Troubleshooting EIGRP for IPv4 Addressing Table Scenario In this activity, you will troubleshoot EIGRP neighbor issues. Use show commands to identify errors in the network configuration. Then, you will document the errors you discover and implement an appropriate solution. Finally, you will verify full end-to-end connectivity is restored. Troubleshooting Process 1.     Use testing commands to discover connectivity problems in the network and document the problem in the Documentation Table. 2.     Use verification commands to discover the source of the problem and devise an appropriate solution to implement. Document the proposed solution in the Documentation Table. 3.     Implement each solution one at a time and verify if the problem is resolved. Indicate the resolution status in the Documentation Table. 4.     If the problem is not resolved, it may be necessary to first remove the implemented solution befor...
Đọc thêm